Download

South Central Correctional Facility

Perimeter Detection System

Order this entire job for $82.97
This job is available for download to registered users. Log in now


Status

Accepting Bids

Prebid Date 3/22/17 10:00 am

Bid Date 5/2/17 2:00 pm

Company & Contacts

Buford Goff and Associates, Inc.

Ravel Ulmer   803-254-6302

Location

Cliftion, TN

You are invited to bid on the SECURITY ELECTRONICS UPGRADETAUT WIRESOUTH CENTRAL CORRECTIONAL FACILITY SBC project #142/018-01-2006-01 in Clifton, TN.

Only those bidding documents / plans obtained from this web site are official.

Bidding documents will be sent as soon as a non-refundable payment of $82.97 (cash,credit card,check) is received by TPM 1241 Assembly St., Columbia, SC 29201 (P.803-252-4770). Electronic bidding documents can be obtained by becoming a registered user.

Pre-Qualification Submittals: Due on March 10, 2017 @ 5:00 pm

Note that pre-bid and bid times are Central Time

Potential bidders and other interested parties may obtain documents through TPM. However, in order to bid this project, the bidder must obtain an official bid envelope from the Designer, Buford Goff & Associates, Inc. by contacting the Project Manager, Ravel Ulmer at (803) 254-6302 or by email at ravel.ulmer@bgainc.com. An official bid envelope may be obtained upon the Designer’s receipt of a certified or cashier’s check made payable to the STATE OF TENNESSEE in the amount of $1,000.00. Bids will not be accepted unless submitted in an official bid envelope.

PROJECT DESCRIPTION
Project includes the upgrade of the perimeter security electronics systems at the South Central Correctional Facility in Clifton, Wayne County, Tennessee. Scope of work shall include, but is not limited to, the following:

  • Furnish and install an air-blown fiber optic cable system as shown on the drawings.
  • Furnish and install a new Perimeter Detection System as shown on the drawings. System shall include but shall not be limited to a Taut Wire Detection System, Barbed Tape Detection System, Microwave Detection System, Alarm Monitoring System, Touch Screen Control System and a Data Logging and Reporting System.
  • Uninterruptible power units and power distribution shall be furnished and installed to provide reliable power to all security system components and building systems as shown on the drawings.